huawei(config)#gpon alarm-profile add
profile-id 5
{ <cr>|profile-name<K> }:
Command:
gpon alarm-profile add profile-id 5
Press
'Q' or 'q' to quit input
> GEM
port loss of packets threshold (0~100)[0]: 10
> GEM
port misinserted packets threshold (0~100)[0]: 30
> GEM
port impaired blocks threshold (0~100)[0]:
>
Ethernet FCS errors threshold (0~100)[0]:
>
Ethernet excessive collision count threshold (0~100)[0]:
>
Ethernet late collision count threshold (0~100)[0]:
> Too
long Ethernet frames threshold (0~100)[0]:
>
Ethernet buffer (Rx) overflows threshold (0~100)[0]:
>
Ethernet buffer (Tx) overflows threshold (0~100)[0]:
>
Ethernet single collision frame count threshold (0~100)[0]:
>
Ethernet multiple collisions frame count threshold (0~100)[0]:
>
Ethernet SQE count threshold (0~100)[0]:
>
Ethernet deferred transmission count threshold (0~100)[0]:
>
Ethernet internal MAC Tx errors threshold (0~100)[0]:
>
Ethernet carrier sense errors threshold (0~100)[0]:
>
Ethernet alignment errors threshold (0~100)[0]:
>
Ethernet internal MAC Rx errors threshold (0~100)[0]:
>
PPPOE filtered frames threshold (0~100)[0]:
> MAC
bridge port discarded frames due to delay threshold (0~100)[0]:
> MAC
bridge port MTU exceeded discard frames threshold (0~100)[0]:
> MAC
bridge port received incorrect frames threshold (0~100)[0]:
> CES
general error time threshold(0~100)[0]:
> CES
severely time threshold(0~100)[0]:
> CES
bursty time threshold(0~100)[0]:
> CES
controlled slip threshold(0~100)[0]:
> CES
unavailable time threshold(0~100)[0]:
>
Drop events threshold(0~100)[0]:
>
Undersize packets threshold(0~100)[0]:
>
Fragments threshold(0~100)[0]:
>
Jabbers threshold(0~100)[0]:
>
Failed signal of ONT threshold(Format:1e-x, x: 3~8)[3]:
>
Degraded signal of ONT threshold(Format:1e-x, x: 4~9)[4]:
> FEC
uncorrectable code words threshold(0~1101600000)[0]:
> FEC
correctable code words threshold(0~1101600000)[0]:
>
Upstream PQ discarded byte alarm threshold(0~65535)[0]:6
>
Downstream PQ discarded byte alarm threshold(0~65535)[0]:6
>
XGEM key errors threshold(0~100)[0]:
>
XGEM HEC error count threshold(0~100)[0]:
Adding
an alarm profile succeeded
Profile
ID : 5
Profile
name: alarm-profile_5
huawei(config)#display gpon alarm-profile
profile-id 5
--------------------------------------------------------------
Profile
ID : 5
Profile
name: alarm-profile_5
--------------------------------------------------------------
GEM
port loss of packets threshold: 10
GEM
port misinserted packets threshold: 30
GEM port impaired blocks threshold: 0
Ethernet FCS errors threshold: 0
Ethernet excessive collision count threshold: 0
Ethernet late collision count threshold: 0
Too
long Ethernet frames threshold: 0
Ethernet buffer (Rx) overflows threshold: 0
Ethernet buffer (Tx) overflows threshold: 0
Ethernet single collision frame count threshold: 0
Ethernet multiple collisions frame count threshold: 0
Ethernet SQE count threshold:
0
Ethernet deferred transmission count threshold: 0
Ethernet internal MAC Tx errors threshold: 0
Ethernet carrier sense errors threshold: 0
Ethernet alignment errors threshold: 0
Ethernet internal MAC Rx errors threshold: 0
PPPOE
filtered frames threshold: 0
MAC
bridge port discarded frames due to delay threshold: 0
MAC
bridge port MTU exceeded discard frames threshold: 0
MAC
bridge port received incorrect frames threshold: 0
CES
general error time threshold: 0
CES
severely time threshold: 0
CES
bursty time threshold: 0
CES
controlled slip time threshold: 0
CES
unavailable time threshold: 0
Drop
events threshold: 0
Undersize packets threshold: 0
Fragments threshold: 0
Jabbers
threshold: 0
Failed
signal of ONU threshold (Format:1e-x): 3
Degraded signal of ONU threshold (Format:1e-x): 4
FEC
uncorrectable code words threshold: 0
FEC
correctable code words threshold: 0
Upstream
PQ discarded byte alarm threshold: 6
Downstream PQ discarded byte alarm threshold: 6
XGEM
key errors threshold: 0
XGEM
HEC error count threshold:
0
--------------------------------------------------------------
Binding
Times:
0
--------------------------------------------------------------
If any one want to learn how to configure Huawei gpon OLT/ONT visit: http://gponsolution.com
回复删除http://gponsolution.com/how-to-configure-huawei-olt.html