How to Configure the Two-Way Transmission Delay Threshold on Huawei S9300?

Questions:
How to configure the Two-Way EPBC Transmission Delay Threshold on Huawei Quidway S9300?

Answer:

Run:system-view,The system view is displayed.
Run:nqa test-instance admin-name test-name,The NQA view is displayed.
Run:threshold rtd rtd-value,The two-way transmission delay threshold is configured.By default, no two-way transmission delay threshold is configured.

NOTE:
This two-way transmission delay refers to the round-trip transmission delay.

For more Huawei Switch news EPBD about Price ans Specification, you can click here.

How to Configure the Master and Slave Interfaces in a Smart Link Group on Huawei S5700?

Questions:
How to configure the Master GPBD and Slave Interfaces in a Smart Link Group on Huawei Quidway S5700?

Answer:

Run:system-view,The system view is displayed.
Run:interface interface-type interface-number,The system view is displayed.
Run:stp disable,STP is disabled on the interface.
Run:quit,Return to the interface view.
Run:smart-link group group-id,The Smart Link group view is displayed.
Run:port interface-type interface-number master,An interface is added to the Smart Link group and is specified as the master interface.
Run:port interface-type interface-number slave,Another interface is added to the Smart Link group and is specified as the slave interface.
A Smart Link group consists of a master interface and a slave interface. By default, a Smart Link group does not have interfaces.

For more Huawei Switch news EPBA about Price ans Specification, you can click here.

How to Configure an Authentication Scheme on Huawei S5700?

Questions:
How to configure MA5616 an Authentication Scheme on Huawei Quidway S5700?

Answer:

Run:system-view,The system view is displayed.
Run:aaa,The AAA view is displayed.
Run:authentication-scheme authentication-scheme-name,An authentication scheme is created and the authentication scheme view is displayed.
By default, there is an authentication scheme named default on the S5700. The default authentication scheme can be modified but cannot be deleted.
Run:authentication-mode { hwtacacs | radius | local }* [ none ],The authentication mode is configured.none indicates non-authentication. By default, local authentication is used.If multiple authentication modes are configured in an authentication scheme, the none mode must be the last to take effect.If the authentication mode is set to RADIUS or HWTACACS, configure a RADIUS or an HWTACACS server template and apply the template in the view of the domain that the user belongs to.
Run:authentication-super none,The authentication scheme used to upgrade user levels is configured.none indicates non-authentication. Users can raise user levels without being authenticated. By default, local authentication specified by super is used to raise user levels.When local authentication is used to raise user levels, run the super password command in the system view to configure the password for raising user levels.

NOTE:
By default, the S5700 performs local authentication for access users.
If users do not need to be authenticated, create an authentication scheme or modify the default authentication scheme by setting the authentication mode to none, and apply this authentication scheme to the domain that users belong to.
The authentication mode used when a user logs in to the S5700 and the authentication mode used to raise the user level must be configured separately.
If multiple authentication modes are configured in an authentication scheme, these authentication modes are used according to the sequence in which they were configured. The S5700 uses the authentication mode that was configured later if it does not receive any response in the current authentication. The S5700 stops the authentication if the user fails to pass the authentication

For more Huawei Switch news about Price MA5612 ans Specification, you can click here.

How to Configure Local Port Mirroring on Huawei S2700?

Questions:
How to configure Local MA5612 Port Mirroring on Huawei Quidway S2700?

Answer:

Run:system-view,The system view is displayed.
Run:observe-port index interface interface-type interface-number,An observing port is configured.
Run:interface interface-type interface-number,The view of the mirrored port is displayed.
Run:port-mirroring to observe-port index { both | inbound | outbound },Interface mirroring is configured on the mirrored port.To monitor packets on multiple interface, repeat 3 and 4.

For more Huawei Switch news about Price MA5616 ans Specification, you can click here.

How to Configure IGMP Snooping Querier on Huawei S2700?

 How to Configure Multicast Huawei GPON Policies on Huawei S2700?

Questions:
How to configure Multicast Policies on Huawei Quidway S2700?

Answer:

Run:system-view,The system view is displayed.
Run:vlan vlan-id,The VLAN view is displayed.
Run:igmp-snooping group-policy acl-number [ version number ],A multicast group policy is configured for the VLAN. Interfaces in the VLAN can dynamically join only the multicast group that matches the specified ACL rules.
By default, no multicast group policy is available in a VLAN. That is, hosts in a VLAN can join any multicast group. If the IGMP version is not specified for a multicast policy, the S2700 applies the policy to all IGMP messages regardless of their versions.

NOTE:
When you create an ACL for a multicast group policy of a VLAN, the configuration takes effect only if you select deny in the rule command. That is, a multicast group policy can only prohibit hosts in a VLAN from accessing all or specified multicast groups.

If an advanced ACL is referenced by the group-policy, the ACL applies to the multicast group regardless of the protocol type specified in the ACL.

For more Huawei Switch news Huawei EPON about Price ans Specification, you can click here.

How to Configure an Interface Description on Huawei S2700?

Questions:
How to configure an MA5600T Interface Description on Huawei Quidway S2700?

Answer:

Run:system-view,The system view is displayed.
Run:interface interface-type interface-number,The interface view is displayed.
Run:description description,A description is configured for the interface.By default, an interface description is "HUAWEI, Quidway Series, X interface", where X specifies the interface type and number.

For more Huawei Switch news MA5616 about Price ans Specification, you can click here.