Huawei LS-S5328C-EI-24S configuration

Huawei Quidway Switch S5300, S5328C-EI Mainframe(20 100/1000Base-X ports 4 gigabit Combo ports, and supports 2 10GE XFP subcards, 4 1000Base-X SFP subcards, 2 10GE SFP+subcards, and 4 10GE SFP+subcards,Dual Slots of power,Without Flexible Card and Power Module)

The S5300 supports the GARP Registration Protocol (GVRP). The GVRP technology implements dynamic

configuration of VLANs. In a complex networking environment, GVRP can simplify VLAN configuration and

reduce network communication faults caused by incorrect configuration of VLANs. This reduces the manual

configurations of network administrators and ensures correct VLAN configurations.

configuration of VLANs. In a complex networking environment, GVRP can simplify VLAN configuration and reduce network communication faults caused by incorrect configuration of VLANs. This reduces the manual

Quidway S5300 series gigabit switches are new generation Ethernet gigabit switches that meet the requirements for high-bandwidth access and Ethernet multi-service convergence, providing powerful Ethernet functions for operators and enterprise customers. Based on the new generation high-performance hardware and Huawei Versatile Routing Platform (VRP),

For more Huawei S5352C-EI information please click here

How to configure Interface-based Traffic Shaping on Huawei S2300 switch?

The Quidway LS-S2309TP-EI-AC series switches are new generation Ethernet intelligent access switches. The S2300 is mainly deployed on the IP MAN and intranets, meeting requirements of carrying various Ethernet services and accessing the Ethernet. Based on the new generation high-performance hardware and Huawei Versatile Routing Platform (VRP), the S2300 supports rich and flexible service features and thus improves the operability, manageability, and service expansibility. In addition, the S2300 supports powerful lightning protection, security features, ACLs, QinQ, 1:1 VLAN switching, and N:1 VLAN switching to flexibly deploy VLANs.

Step 1 Run:

system-view

The system view is displayed.

Step 2 Run:

interface interface-type interface-number

The interface view is displayed.

Step 3 Run:

qos lr outbound cir cir-value [ cbs cbs-value ]

The traffic shaping rate is configured in the outbound direction on an interface.

The default shaping rate of an interface is the maximum bandwidth of the interface.

NOTE:

If the queue shaping is also configured on the interface, the CIR of traffic shaping cannot be smaller than the sum of CIR values of queue shaping; otherwise, traffic shaping may be abnormal, for example, the queue with a lower priority occupies the bandwidth of the queue with a higher priority.

For more Huawei S2309TP-EI information please click here

How to configure file of the Switch on Huawei S3352P-PWR-EI switch?

How to configure file of the Switch on Huawei S3352P-PWR-EI switch?

Huanetwork.com offers Huawei Quidway S3300 series switches, which are new generation Ethernet intelligent access switches. Based on the new generation high-performance hardware and Huawei Versatile Routing Platform (VRP), the S3300 Quidway switch supports rich and flexible service features and thus improves the operability, manageability, and service expansibility, fully meeting the requirement of flexible networking.

#
sysname Switch
#
vlan batch 10 20 30
#
interface GigabitEthernet0/0/1
 port link-type trunk
 port trunk allow-pass vlan 10 20 30
 qos schedule-profile p1
#
interface GigabitEthernet0/0/2
 port link-type trunk
 port trunk allow-pass vlan 10 20 30
 qos schedule-profile p1
#
interface GigabitEthernet0/0/3
 port link-type trunk
 port trunk allow-pass vlan 10 20 30
 trust 8021p
#
 qos schedule-profile p1
   qos queue 2 wrr weight 10
   qos queue 5 wrr weight 20
   qos queue 7 wrr weight 0
#
return

For more Huawei S3328TP-PWR-EI information please visit: www.huawei.com