Configure the interface mode to user termination. # Configure PE1.

[PE1] interface LS-S2318TP-EI-DC   gigabitethernet 1/0/0

[PE1-GigabitEthernet1/0/0] mode user-termination

[PE1-GigabitEthernet1/0/0] undo shutdown

[PE1-GigabitEthernet1/0/0] quit

# Configure PE2.

[PE2] interface gigabitethernet 2/0/0

[PE2-GigabitEthernet2/0/0] mode user-termination

[PE2-GigabitEthernet2/0/0] undo shutdown

[PE2-GigabitEthernet2/0/0] quit

Configure the sub-interface for dot1q VLAN tag termination and bind VSIs and AC interfaces.

# Configure PE1.

[PE1] interface gigabitethernet 1/0/0.1

[PE1-GigabitEthernet1/0/0.1] control-vid 1 dot1q-termination

[PE1-GigabitEthernet1/0/0.1] dot1q termination vid 10

[PE1-GigabitEthernet1/0/0.1] l2 binding vsi ldp1

[PE1-GigabitEthernet1/0/0.1] undo shutdown

[PE1-GigabitEthernet1/0/0.1] quit

# Configure PE2.

[PE2] interface gigabitethernet 2/0/0.1

[PE2-GigabitEthernet2/0/0.1] control-vid 1 dot1q-termination

[PE2-GigabitEthernet2/0/0.1] dot1q termination vid 10

[PE2-GigabitEthernet2/0/0.1] l2 binding vsi ldp1

[PE2-GigabitEthernet2/0/0.1] undo shutdown

[PE2-GigabitEthernet2/0/0.1] quit

 NOTE:

On different sub-interfaces LS-S2326TP-EI-AC , the vid values cannot overlap.