How to configure Interface-based Traffic Shaping on Huawei S2300 switch?

The Quidway LS-S2309TP-EI-AC series switches are new generation Ethernet intelligent access switches. The S2300 is mainly deployed on the IP MAN and intranets, meeting requirements of carrying various Ethernet services and accessing the Ethernet. Based on the new generation high-performance hardware and Huawei Versatile Routing Platform (VRP), the S2300 supports rich and flexible service features and thus improves the operability, manageability, and service expansibility. In addition, the S2300 supports powerful lightning protection, security features, ACLs, QinQ, 1:1 VLAN switching, and N:1 VLAN switching to flexibly deploy VLANs.

Step 1 Run:

system-view

The system view is displayed.

Step 2 Run:

interface interface-type interface-number

The interface view is displayed.

Step 3 Run:

qos lr outbound cir cir-value [ cbs cbs-value ]

The traffic shaping rate is configured in the outbound direction on an interface.

The default shaping rate of an interface is the maximum bandwidth of the interface.

NOTE:

If the queue shaping is also configured on the interface, the CIR of traffic shaping cannot be smaller than the sum of CIR values of queue shaping; otherwise, traffic shaping may be abnormal, for example, the queue with a lower priority occupies the bandwidth of the queue with a higher priority.

For more Huawei S2309TP-EI information please click here