Configuring the Sub-interface

Configure ME60 

# Configure link layer protocol as FR on POS 1/0/0 of ME60 A.

<HUAWEI> system-view

[HUAWEI] sysname ME60A

[ME60A] interface pos 1/0/0

[ME60A-Pos1/0/0] link-protocol fr

[ME60A-Pos1/0/0] undo shutdown

[ME60A-Pos1/0/0] quit

# Configure the sub-interface POS 1/0/0.1 on ME60 A, and assign VC for it.

[ME60A] intrface pos 1/0/0.1 p2p

[ME60A-Pos1/0/0.1] ip address 202.38.160.1 255.255.255.0

[ME60A-Pos1/0/0.1] undo shutdown

[ME60A-Pos1/0/0.1] fr dlci 50

[ME60A-fr-dlci-Pos1/0/0.1-50] quit

# Configure the sub-interface POS 1/0/0.2 on ME60 A, and assign VC for it.

[ME60A] interface pos 1/0/0.2 p2p

[ME60A-Pos1/0/0.2] ip address 202.38.161.1 255.255.255.0

[ME60A-Pos1/0/0.2] undo shutdown

[ME60A-Pos1/0/0.2] fr dlci 60

[ME60A-fr-dlci-Pos1/0/0.2-60] quit

# Configure the static routes from ME60 A to LAN2 and LAN3.

[ME60A] ip route-static 129.10.0.0 255.255.0.0 202.38.160.2

[ME60A] ip route-static 129.11.0.0 255.255.0.0 202.38.161.2

 NOTE:

This example mainly explains sub-interface configuration. ME60 B and ME60-X3     do not require sub-interfaces configuration.